Products

• Z275G Cold Rolled Base Galvanized Steel Coils Regular Spangle Zinc

  Z275g hot Sale galvanized steel coils is mild steel with a coating of zinc The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel Galvanised steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion .

  MORE
• DX51D/SGCC Galvanized Coil

  DX51D material is a mild steel galvanized layer for steel products. Specifically, DX51D is a steel grade characterized by its cold-formed bending and profiling qualities.

  MORE
• Electro Galvanized Coil EG Coil

  Electro-galvanized steel is a plating process where the steel is placed in an electrically charged solution of zinc and saline. This causes the zinc to chemically bond to the conductive steel. Electro-plating is frequently used for coiled sheet steel, which is later formed into shapes such as c-purloins, and corrugated sheets or can be formed and welded into pipes and tubes.

  MORE
• DC01 Galvanized coil

  DC01 galvanized coil is a surface galvanized sheet with yield strength of 235MPa. Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.

  MORE
• CHINA DX56D Galvanized steel sheet in coil zero spangle

  Galvanized steel coils are made by cold-rolling or hot-rolling high-quality carbon structural steel into steel plates, and then evenly coating a layer of zinc on the surface of the steel plates through hot-dip plating or electro-galvanizing. This treatment method can significantly improve the corrosion resistance and service life of the steel plate.

  MORE
• Galvanized steel coil

  Galvanized steel coils are made by cold-rolling or hot-rolling high-quality carbon structural steel into steel plates, and then evenly coating a layer of zinc on the surface of the steel plates through hot-dip plating or electro-galvanizing. This treatment method can significantly improve the corrosion resistance and service life of the steel plate.

  MORE